Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET
Choose a sub category:
SHELF BRACKETS SHELF BRACKETS - HEAVY DUTY SHELF BRACKETS - WOOD
SHELF KITS SHELF STANDARDS SHELF BRACKETS FOR STANDARDS
SHELF NAILS/SCREWS SHELF SUPPORTS PRE-FINISHED SHELVES
VENTILATED SHELVING VENTILATED SHELVING MOUNTING VENTILATED SHELVING ACCESSORI
VENTILATED SHELVING KITS VENTILATED STORAGE SHLVS/CARTS METAL SHELVING
GLASS SHELVING CLOSET ROD BRACKETS CLOSET POLE SOCKETS
CLOSET RODS CLOSET SYSTEMS CLOSET ACCESSORIES
Sort By:
1 2 3 ... 17
Stanley 218941 Utility Shelf Bracket SuperSlide 948 Pre-Loaded Wall Bracket Closetmaid 01016 End Cap
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg; second measurement denotes nominal length of wall leg. Bulk pak. Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
SuperSlide 5629 Closet Rod Support Prime Line N 6568 Pole Socket Knape & Vogt 255 Adjustable Shelf Standard
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
SCREW MOUNTING CHM FIN        SCREW MOUNTING ORB FIN        SCREW MOUNTING WHITE
MOUNTING SCREWS WHT
Our Price: $2.07
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket. Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2" pan head screws for mounting brackets to the wall. Four 3/4" pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf & rod bracket.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt CD-0019 Closet Pole End Cap
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole).
Knape & Vogt BK-0101 Shelf Bracket Knape & Vogt PK255 BR 36 Standard Pilaster Knape & Vogt 180 Regular Duty Shelf Bracket
Designed to fit into the fast mount standards, load tested to 100 lbs. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt CD-0242-PM Wall Mount Shelf Standard Knape & Vogt 80-88D PWH Standard Shelf Screw Knape & Vogt 80-88DP ANO Standard Shelf Screw
Screw pack for heavyweight wall standard, (14) 2-1/2" Screws. Screws are 1-1/2" long with a #8 body and #6 head. Screws are 1-1/2" long with a #8 body and #6 head.
SuperSlide 6609 Pre-Loaded Wall Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Regular Duty Shelf Bracket Mintcraft 25211PHL Single Slot Shelf Standard Closetmaid 6610 Wall Clip
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Anchors shelf to wall. Ensures stability of shelf.
BRACKET SUPPORT SHOE SHELF WHT Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 255 Standard Pilaster
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
SuperSlide 5655 Closet Rod Support Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket Closetmaid 1002 Joiner Plate
Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin.
   
 
1 2 3 ... 17